Part Number: AM-4008667757
Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.
These steering and suspension parts come pre-greased sealed and do not require servicing.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
10 Year Warranty
This item is backed by our 10-year warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Please note: Any modifications to an item of any kind before contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation.
This part replaces:
- Dorman 520-139
- Dorman 520-140
- Hollander 511-00941R
- Moog K5335
- Moog K620172
- Moog K620173
- Moog K6251
- Moog ES2004S
- Moog K6600
- Moog K6255
- Moog ES3462
- Moog ES3584
- Hollander 511-01136L
- OE # 26048561
- OE # 8260485610
- OE # 7839709
- OE # 12471301
- OE # 26054968
- OE # 12471300
- OE # 15661508
Vehicle Fit
- 1998 Chevrolet Blazer 4 Wheel Drive with Offset Tie Rod Front 14 Piece Steering & Suspension Kit AM Autoparts AM-4008667757
- 1999-2005 Chevrolet Blazer 4 Wheel Drive Front 14 Piece Steering & Suspension Kit AM Autoparts AM-4008667757
- 1998 Chevrolet S10 Pickup 4 Wheel Drive with Offset Tie Rod Front 14 Piece Steering & Suspension Kit AM Autoparts AM-4008667757
- 1999-2003 Chevrolet S10 Pickup 4 Wheel Drive Front 14 Piece Steering & Suspension Kit AM Autoparts AM-4008667757
- 2004 Chevrolet S10 Pickup Front 14 Piece Steering & Suspension Kit AM Autoparts AM-4008667757
- 1998 GMC Jimmy 4 Wheel Drive with Offset Tie Rod Front 14 Piece Steering & Suspension Kit AM Autoparts AM-4008667757
- 1999-2001 GMC Jimmy 4 Wheel Drive Front 14 Piece Steering & Suspension Kit AM Autoparts AM-4008667757
- 1998 GMC S-15 Sonoma 4 Wheel Drive with Offset Tie Rod Front 14 Piece Steering & Suspension Kit AM Autoparts AM-4008667757
- 1999-2003 GMC S-15 Sonoma 4 Wheel Drive Front 14 Piece Steering & Suspension Kit AM Autoparts AM-4008667757
- 2004 GMC S-15 Sonoma Front 14 Piece Steering & Suspension Kit AM Autoparts AM-4008667757
- 1998 Isuzu Hombre 4 Wheel Drive with Offset Tie Rod Front 14 Piece Steering & Suspension Kit AM Autoparts AM-4008667757
- 1999-2000 Isuzu Hombre 4 Wheel Drive Front 14 Piece Steering & Suspension Kit AM Autoparts AM-4008667757
- 1999-2001 Olds Bravada Front 14 Piece Steering & Suspension Kit AM Autoparts AM-4008667757
Product Reviews
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
only problem i noticed doing the control arms is they are missing a brake line bolt. this was on a 2004 Chevrolet Blazer 4x4
not a big problem but noticeable. when using i advise keeping your brake sensor clip and attaching with ziptie or self tapping screw.
tie rods are a perfect replica of the factory sets. control arms are noticeably shaped different but the steel seems thicker
BE CAREFUL TIGHTENING TIE RODS
the threads are very soft. any over tightening will absolutely strip the castle nut and tie rod.
sway bar bushings are more steel than factory which is preferred for me. solid bushings where necessary. on both sway and control arms.
no zerks on any tie rod... :/
all around nice product. hope it holds up as long as the factory parts have
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Just got it together yesterday and aligned today, so we'll have to see how they hold up...
- Was this review helpful? Yes (6) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (6) No (0)
- Flag as Inappropriate
Add this part:
Add the pair and Save: